Scoppy - Oscilloscope and Logic Analyzer 1.018 [free]

Combine Scoppy with a Raspberry Pi Pico to create a 500kS/s oscilloscope and 25MS/s logic analyzer.Key Features:
- Horizontal scale and position adjustments
- Vertical scale and position adjustments
- Trigger channel and level selection
- Rising edge and falling edge triggers
- Auto and Normal triggering
- Continuous (Run) and Single capture modes
- Memory depth up to 100kpts for single captures
- Vertical and Horizontal Cursors
- Auto or fixed sample rate
- % pre-trigger samples setting
- Signal Generator
--- square wave (100Hz - 1.25MHz)
--- 1kHz PWM sine waveOscilloscope
- Two Channels
- Up to 500k samples per second (shared between channels)
- Time/Div: 5us - 20secs
- Up to 4 configurable voltage ranges per channel (see help for details)Logic Analyzer
- Eight Channels
- Up to 25M samples per second (per channel)
- Time/Div: 50ns - 100msAnalog Front End
Connect the input signal directly to the Pico ADC pins for 0-3.3V inputs or build your own analog front end. Several cheap and easy to build open-source designs can be found
at oscilloscope.fhdm.xyzMore information
More information including instructions for installing the (free and open-source) firmware onto your Pico can be found here: https://github.com/fhdm-dev/scoppy and
https://oscilloscope.fhdm.xyz

• 04/27/2022: Scoppy - Oscilloscope and Logic Analyzer 1.018
• Report a new version